 |
|
|
 |
|
|
|
 |
FEATURES:
• 2 Module Slots allowing
10TU-10 channels screw type terminal
block
20TU-20 channels screw type terminal
block
50TU-50 channels screw type terminal
block
M3TU-10 channel M3 screw module
• Voltage Inputs: ±20,
50, 100,200,500mV, ±1, 2, 5,
10, 50V, 1-5V
Thermocouple Inputs: K,J,E,T,R,S,B,N,W
Humidity: 0 – 100%
• Sampling Time: 100ms –
1 hour
• Trigger Start / Stop Recording
• Pulse / Logic Input
• Alarm output
• Data Storage: Internal Memory
or PCMCIA / Compact Flash Card
• Interface to PC: Ethernet
or USB2 User-friendly design
• AC, DC or integral Battery
(Optional)
• Bundled Software
|
|
 |
|
The GL450 is a compact data logger, with an A5 footprint,
providing excellent portability. All channels are isolated
channel-to-channel and channel-to-ground. It has the ability
to perform simultaneous measurement of voltage, temperature
and humidity. It also supports such as inputs as pulse
(e.g. power, rpm and flow) and logic, in addition to voltage
and temperature
Four type s of input terminal units are available, supporting
10, 20, and 50 channels. By combining appropriate terminal
units, up 100 channels are available. The new M3 terminal
unit allows connecting transducers with eye or fork termination
to be connected therefore significantly decreasing costs,
allowing you to purchase multiple terminal units to meet
the needs. Low-cost terminal units can be left attached
to the objects for measurement, eliminating time and effort
to make cable connections every time you change the location.
The control panel has a very user-friendly layout utilising
navigation keys resembling a mobile phone. Since menus
are designed to follow actual workflow, even first-time
users can easily perform setups and display measurement
data. Data analysis and report creation are just as easy.
The screens on the main unit are similar in design to
those of application software, providing almost the same
operational procedures in both standalone and PC-controlled
modes. Depending on measurement needs, an appropriate
screen can be selected: Analogue + Digital, Analogue,
Digital + Calculation, and Digital.
An optional battery allows you to use the device in an
environment where a stable power source does not exist.
When battery is installed, the system automatically switches
to battery power when AC power fails. When the battery
capacity declines to a certain level, the system automatically
stores the captured data in the PCMCIA card.
Multiple GL450 units can be synchronized, thus allowing
to achieve up to 100 channel without sacrificing a sampling
rate.(An optional cable is required for synchronizing
multiple main units. The synchronization feature is supported
in PC-controlled configuration only.)
Multiple GL450 units can be synchronized, thus allowing
to achieve up to 100 channel without sacrificing a sampling
rate.(An optional cable is required for synchronizing
multiple main units. The synchronization feature is supported
in PC-controlled configuration only.)
|
Models
& Prices
| Part
Number |
Description |
Price |
Buy
Online |
| GL-450-EU |
Midi Logger with 10 channel input
terminal |
£1,305 |
|
Input Terminals
10TU |
10 Channels input Terminal |
£250 |
|
| 20TU |
20 Channels input Terminal |
£500 |
|
50TU
|
50 Channels input Terminal |
£1250 |
|
| M3TU |
10 channel input terminal unit with
M3 screw |
£500 |
|
Options
B-513 |
Logic Alarm cable, barre tips (2m) |
£70 |
|
| B-514 |
DC Power Cable |
£60 |
|
| B-515 |
Bridge Cable - (1m) |
£60 |
|
| B-517 |
Battery Pack |
£85 |
|
| B-530 |
Humidity Sensor |
£310 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
