 |
|
|
 |
|
| DI-148U-SP Starter
Kit Low-Cost USB Data Acquisition System |
|
|
|
 |
FEATURES:
• Two string pot inputs plus two
general purpose inputs (±10V
range)
• Low-cost, compact, data acquisition
starter kit.
• Record Data With 10 Bits of
Measurement Accuracy at Rates Up to
14,400 Samples/Second. WinDaq High Speed
Acquisition software required for recording
rates over 240Hz.
• Convenient USB Interface.
• Six digital bits for general
purpose I/O.
• Includes WinDaq/Lite recording
software, WinDaq Waveform Browser playback
and analysis software, communications
cable, screwdriver, and documentation.
|
|
 |
|
Product Highlights
Model DI-148U-SP is similar to the general purpose model
DI-148U, but is designed to connect directly to as many
as two string pots for displacement measurements. Two
general purpose inputs are also supported. When used with
string pots, model DI-148U-SP provides a complete solution,
with a built-in, stable excitation supply that is exposed
for each string pot channel.
Like the DI-148U, the DI-148U-SP supports a channel scan
list, high sample rate throughput, and a USB interface.
These features combine to produce a robust instrument
that can be applied to nearly any data acquisition situation
where pre amplified signals need to be acquired to a PC,
and where displacement measurements using string pots
need to be made. Rounding out the products are six bidirectional
TTL ports that may be used for general purpose control
Sample rates may range from sub Hertz, to 14,400 Hz.
High Sample Throughput
Supports sample throughput rates up to 14,400 samples
per second. High Speed version of WinDaq/Lite Recording
software is required to reach these high sample rates.
WinDaq/Lite is limited to recording rates of 240 Hz throughput.
Easy to Connect and Use
Connects to any local laptop or desktop PC. Built-in excitation
for up to two string pots. Two, built-in, 8 position screw
terminal connectors allow easy and secure access to all
signal I/O connections without the need for extra options.
Small Package
The DI-148 is housed in a small plastic enclosure measuring
66D × 66W × 28H mm (2.6D × 2.6W ×
1.1H inches).
WinDaq Software Included
The DI-148 data recorder starter kit includes WinDaq/Lite
recording software and WinDaq Waveform Browser playback
and analysis software. An extra cost high-speed acquisition
version of WinDaq is available for these products. WinDaq/Lite
is limited to recording rates of 240 Hz throughput.
Step up to the DI-158 Series
Need a higher Full Scale Voltage range with programmable
gain and analog outputs? Then consider our cost-effective
DI-158 Series of Starter Kits. The DI-158 Series of products
offer more control options with their analog output capability,
connect to a wider range of voltages (up to ±64
Volts), have more flexibility with per-channel selectable
gain ranges, and has a USB interface. There has never
been more power in such a cost-effective instrument.
|
Models
& Prices
| Part
Number |
Description |
Price |
Buy
Online |
| DI-148U-SP |
Data acquisition starter kit with
USB interface, 2 string pot inputs,
2 general purpose analogue inputs, and
a full scale range of ±10 Volts. |
£99 |
|
WINDAQ /
HS-148
|
Special High-Speed version of WINDAQ/Lite.
Record at the speed of the instrument.
CD will be shipped (shipping charges
apply). |
£195 |
|
WINDAQ /
HS- 148-EMAIL
|
Special High-Speed version of WINDAQ/Lite.
Unlock Code ONLY. No
CD will be shipped. This is for people
who have purchased the hardware product
and would like to upgrade to High Speed
|
£195 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
