 |
|
|
 |
|
| DI-710 Data Logger
products operate Stand-alone or PC-connected |
|
|
|
 |
FEATURES:
• Low-Cost, Portable, USB or Ethernet
Data Logger or Data Acquisition System.
• 16 single-ended, 8 differential
analog inputs.
• Stand-alone data logger option
allows in-the-field measurements to
be saved to Secure Digital Cards (SD).
• Built-in Real Time Clock allows
automatic time and date stamping of
data acquired to SD memory when used
in the stand-alone mode.
• 14-bit analog to digital conversion.
• Includes WinDaq Software.
• Record up to 14,400 samples
per second (assumes SD latencies of
80 milliseconds or less) with Stand-alone
models or up to 4,800 samples per second
with PC-connected instruments (WinDaq/HS
required to achieve recording rates
over 1,108 Hz with PC-connected instruments).
• Measurement range of ±10mV
to ±10V (-L Models) or ±1.25V
to ±10V (-H Models). |
|
 |
|
Product Highlights
The DATAQ Instruments DI-710 Series of products is a family
of eight instruments for general purpose and stand-alone
data acquisition applications. Options include interface
type, input voltage range, and PC-connected or stand-alone
data logger operation. Interface options are USB or Ethernet.
Gain ranges have selectable factors per channel of 1,
2, 4, and 8, or 1, 10, 100, and 1000. Instruments with
the stand-alone data logger option feature a built-in
multimedia socket that accepts secure digital cards (SD)
to which acquired data may be stored without a connected
PC. SD memories are the same commonly available mass storage
devices used with digital cameras and MP3 players. Memories
ranging in size from 32MB to 1GB are supported. Instruments
without this option must remain tethered to a PC’s
USB or Ethernet port during data acquisition and use the
PC's own program and memory to store acquired data.
All DI-710 Series products feature 14-bit measurement
resolution, sixteen analog input channels that may be
configured for single ended or differential operation
per channel, and an 8-bit digital bidirectional port.
PC-connected instruments stream data to the PC at a 4,800
sample per second throughput rate (WinDaq/HS required
for sample rates over 1,108 Hz throughput). Stand-alone
data logger store to their internal SD memory at sample
throughput rates of 14,400 samples per second. Minimum
sample throughput rates are 0.44 Hz for stand-alone, and
0.048 samples per hour for tethered instruments. All DI-710
instruments are supplied with a removable, 32-position
screw terminal access connectors.
Powerful Data Acquisition Server Capability
DI-710 Stand-alone data logger are the first in their
price range to offer data acquisition server capability.
Acting as a server allows stand-alone instruments to locally
and independently acquire data to their memory cards,
and then make that acquired data available upon demand,
either by plugging the memory card into a reader, or uploading
via the Ethernet interface.
Ethernet-enabled DI-710s provide the most power and flexibility.
A DI-710 with an Ethernet interface and built-in memory
transparently becomes like any other computer on a network,
able to share recorded data over a network to a PC on
the other side of the facility, or over the Internet to
a PC on the other side of the world. These stand-alone
instruments can be added easily and seamlessly to existing
networks without incremental bandwidth burdens, storing
data in memory and uploading on demand. Stand-alone data
logger can also be controlled locally using multifunction
push-button control and multi-colored, red, green, orange
LED status indicator.
Recommended Memory Card
For optimal performance, DATAQ Instruments, Inc. recommends
using a Sandisk Secure Digital Card to record your data.
Data Acquisition To Go
Complete portability in a small (5.4375"D ×
4.125"W × 1.5"H), lightweight (14 oz.),
self-contained package with built-in signal connectors.
Use the DI-710 with desktop, transportable, notebook,
or laptop computers or over an installed Ethernet or as
a stand-alone data logger.
Wide Signal Measurement Range
Suitable for use with many different signal sources, the
16-channel single-ended, 8-channel differential DI-710
features a per channel measurement range of ±10
V over four gain ranges. This allows you to simultaneously
measure a wide range of signals with ease.
Flexible Programmability
Channel-by-channel software selection of gain, single-ended/differential
operation, and signal averaging.
Fast Throughput Rate
Supports sample throughput rates to 14400 samples per
second (assumes SD latencies of 80 milliseconds or less)
to SD with stand-alone Models and 4800 samples per second
to PC with PC-connected Models. WinDaq/HS is required
to achieve recording rates over 1,108 Hz with PC-connected
instruments. Gains of 100 and 1000 greatly reduce effective
maximum throughput rates - see the manual for specifications.
Easy to Connect & Use
Installs in seconds. Simply connect to your computer's
USB port or an Ethernet port using the supplied cable.
Connect power, then connect your signals to the provided
screw terminal blocks (16 ports each). Stand-alone models
just need a memory card and power.
Includes WinDaq Software
Be up and running minutes out of the box with WinDaq acquisition
and playback software. WinDaq/Lite software is included
free with the purchase of every DI-710 instrument. WinDaq/Lite
operates at a maximum throughput recording rate of 1,108
Hz with a DI-710 Instrument. A special version of WinDaq
acquisition software may be purchased (WinDaq High Speed
Option) allowing you to record data at the speed of the
instrument (up to 4800 Hz).
WinDaq Waveform Browser, our unrestricted playback and
analysis software for Windows, is also included free with
the purchase of every DI-710. Use it to review, measure,
compare, and analyze the waveform file after it has been
recorded by WinDaq acquisition software. WinDaq software
products support up to 14 bits of measurement resolution.
Need Signal Conditioned Inputs?
Our DI-715B Series and DI-718B Series offer all the same
great features of the DI-710 Series but with Signal Conditioned
Inputs.
|
Models
& Prices
| Part
Number |
Description |
Price |
Buy
Online |
| DI-710-UH |
Low-cost, portable, USB data acquisition
system featuring 16 single-ended or
8 differential analogue inputs, a maximum
sample rate up to 4800 samples/second,
and programmable gain ranges of 1, 2,
4, and 8. Includes USB and Power cables,
software, and documentation. |
£599 |
|
| DI-710-UHS |
Same as DI-710-UH but with stand-alone
data logger capability and maximum sample
rate up to 14400 samples per second
to memory card. |
£599 |
|
DI-710-UL
|
Same as DI-710-UH but with programmable
gain ranges of 1, 10, 100, and 1000. |
£599 |
|
DI-710-ULS
|
Same as DI-710-UHS but with programmable
gain ranges of 1, 10, 100, and 1000. |
£599 |
|
| DI-710-EH |
Low-cost, portable, Ethernet data
acquisition system featuring 16 single-ended
or 8 differential analogue inputs, a
maximum sample rate up to 4800 samples/second,
and programmable gain ranges of 1, 2,
4, and 8. Includes Power cable, software,
and documentation (Ethernet cable not
included). |
£599 |
|
| DI-710-EHS |
Same as DI-710-EH but with stand-alone
data logger capability and maximum sample
rate up to 14400 samples per second
to memory card. |
£799 |
|
| DI-710-EL |
Same as DI-710-EH but with programmable
gain ranges of 1, 10, 100, and 1000. |
£599 |
|
| DI-710-ELS |
Same as DI-710-EHS but with programmable
gain ranges of 1, 10, 100, and 1000. |
£799 |
|
WINDAQ/HS-
710
|
Special High-Speed version of WINDAQ/Lite.
Record at the speed of the instrument
when acquiring directly to a PC. Not
required when acquiring to built-in
memory. CD will be shipped (shipping
charges apply). |
£595 |
|
WINDAQ/HS-
710-EMAIL
|
Special High-Speed version of WINDAQ/Lite.
Unlock Code ONLY. No
CD will be shipped. This is for people
who have purchased the hardware product
and would like to upgrade to High Speed
|
£595 |
|
| 101014-1G |
1 GigaByte Secure Digital Flash Memory.
For use with stand-alone models only. |
£99 |
|
| 101014-128 |
128 MegaByte Secure Digital Flash
Memory. For use with stand-alone models
only. |
£19 |
|
| 101014-CR |
USB Secure Digital Memory Card Reader. |
£25 |
|
| 100952 |
Power Connector (for customers who
want to provide their own power). |
£2 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
