 |
|
|
 |
|
| DI-715B Data Logger
products operate Stand-alone or PC-connected |
|
|
|
 |
FEATURES:
• Low-Cost, Portable, Ethernet
Data Logger (USB to Ethernet converter
available). This product is similar
to the DI-710 Data Logger but with Signal
Conditioned inputs. See also the DI-718B
series for many of the same features
but in a much smaller package using
DI-8B modules.
• 8 signal-conditioned analog
inputs. Add 8 more with the DI-75B backpack
• Stand-alone data logger option
allows in-the-field measurements to
be saved to Secure Digital Cards (SD).
• 14-bit analog to digital conversion.
• Includes WinDaq Software.
• Record up to 14,400 samples
per second (assumes SD latencies of
80 milliseconds or less) with Stand-alone
models or up to 4,800 samples per second
with PC-connected instruments (WinDaq/HS
required to achieve recording rates
over 1,108 Hz with PC-connected instruments).
• Wide variety of measurement
functions and ranges based on DI-5B
module selections |
|
 |
|
Product Highlights
The DI-715B is an eight-channel, 5B-module data logger
system. Each DI-715B accepts up to eight high-performance,
plug-in (DI-5B) signal conditioning modules to include
virtually any isolated, industrial-type signal. Because
DI-5B modules are identical in pinout and size, they can
be mixed or matched in any combination. Choose from thermocouple,
true rms, voltage, strain, frequency, process current,
RTD, potentiometric, or DC transducer—whatever suits
your application. A clear acrylic front panel allows easy
identification of all installed 5B modules.
The DI-715B Series provide an option for PC-connected
or stand-alone data logger operation. Instruments with
the stand-alone data logger option feature a built-in
multimedia socket that accepts standard Secure Digital
(SD) memories to which acquired data may be stored without
a connected PC. SD memories are the same commonly available
mass storage devices used with digital cameras and MP3
players. Memories ranging in size from 32MB to 1GB are
supported. Instruments without this option must remain
tethered to a PC’s USB or Ethernet port during data
acquisition and use the PC’s own program and memory
to store acquired data. Software selectable gain ranges
of 1, 2, 4, and 8 are supported.
Make Industrial Measurements Through DI-5B Plug-in
Signal Conditioning Modules
Each channel on the DI-715B accomodates one DI-5B module
providing a single channel of isolated input protection,
amplification, and filtering. DI-5B modules are plugged
into a socketed backplane and are secured with a mounting
screw. Each DI-715B channel has 4 corresponding screw
terminals for your signal connections: channel +, channel-,
excitation +, and excitation -. These terminals satisfy
all transducer inputs and provide sensor excitation if
necessary. Access to the DI-5B modules is through a removable
front panel.
Powerful Data Acquisition Server Capability
DI-715B Stand-alone data logger are the first in their
price range to offer data acquisition server capability.
Acting as a server allows stand-alone instruments to locally
and independently acquire data to their memory cards,
and then make that acquired data available upon demand,
either by plugging the memory card into a reader, or uploading
via the Ethernet interface.
Ethernet-enabled DI-715Bs provide the most power and flexibility.
A DI-715B with an Ethernet interface and built-in memory
transparently becomes like any other computer on a network,
able to share recorded data over a network to a PC on
the other side of the facility, or over the Internet to
a PC on the other side of the world. These stand-alone
instruments can be added easily and seamlessly to existing
networks without incremental bandwidth burdens, storing
data in memory and uploading on demand. Stand-alone data
logger can also be controlled locally using multifunction
push-button control and multi-colored, red, green, orange
LED status indicator.
Recommended Memory Card
For optimal performance, DATAQ Instruments, Inc. recommends
using a SanDisk Secure Digital Card to record your data.
Fast Throughput Rate
Supports sample throughput rates to 14400 samples per
second (assumes SD latencies of 80 milliseconds or less)
to SD with stand-alone Models and 4800 samples per second
to PC with PC-connected Models. WinDaq/HS is required
to achieve recording rates over 1,108 Hz with PC-connected
instruments.
Easy to Connect & Use
Installs in seconds. Simply connect to your computer's
USB port or an Ethernet port using the supplied cable.
Connect power, then connect your signals to the provided
screw terminal blocks. Stand-alone models just need a
memory card and power.
Expandable
Add 8 more signal conditioned input channels with a DI-75B
5B module backpack. Fully mountable with optional stacking
brackets.
Includes WinDaq Software
Be up and running minutes out of the box with WinDaq acquisition
and playback software. WinDaq/Lite software is included
free with the purchase of every DI-715B instrument. WinDaq/Lite
operates at a maximum throughput recording rate of 1,108
Hz with a DI-715B Instrument. A special version of WinDaq
acquisition software may be purchased (WinDaq High Speed
Option) allowing you to record data at the speed of the
instrument (up to 4800 Hz).
WinDaq Waveform Browser, our unrestricted playback and
analysis software for Windows, is also included free with
the purchase of every DI-715B. Use it to review, measure,
compare, and analyze the waveform file after it has been
recorded by WinDaq acquisition software. WinDaq software
products support up to 14 bits of measurement resolution.
Looking for the same features without signal conditioned
inputs?
Our DI-710 Series Data Logger provides all the same great
features as the DI-715B Series and more - without the
built-in DI-5B backplane.
|
Models
& Prices
| Part
Number |
Description |
Price |
Buy
Online |
| DI-715B-E |
Low-cost, portable, Ethernet data
acquisition system featuring 8 analogue
inputs designed to be used with DI-5B
modules (not included), a maximum throughput
rate up to 4800 samples/second, and
programmable gain ranges of 1, 2, 4,
and 8. Includes Power cable, software,
and documentation (Ethernet cable not
included). |
£1495 |
|
| DI-715B-ES |
Same as DI-715B-E but with stand-alone
data logger capability and maximum sample
rate up to 14400 samples per second
to SD. |
£1695 |
|
WINDAQ/HS-
715B
|
Special High-Speed version of WINDAQ/Lite.
Record at the speed of the instrument
when acquiring directly to a PC. Not
required when acquiring to built-in
memory. CD will be shipped (shipping
charges apply). |
£595 |
|
WINDAQ/HS-
715B-EMAIL
|
Special High-Speed version of WINDAQ/Lite.
Unlock Code ONLY. No
CD will be shipped. This is for people
who have purchased the hardware product
and would like to upgrade to High Speed
|
£595 |
|
| 101014-1G |
1 GigaByte Secure Digital Flash Memory.
For use with stand-alone models only. |
£99 |
|
| 101014-128 |
128 MegaByte Secure Digital Flash
Memory. For use with stand-alone models
only. |
£19 |
|
| 101014-CR |
USB Secure Digital Memory Card Reader. |
£25 |
|
| 101014-EA |
External USB to Ethernet converter.
Allows you to connect your DI-715B to
your USB port. Adds an external Ethernet
card to your PC |
£30 |
|
| DI-75B-7 |
8-channel signal conditioned input
expander. Includes interconnecting and
power cables. |
£795 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
