 |
|
|
 |
|
| DI-718B Data Logger
products operate Stand-alone or PC-connected |
|
|
|
 |
FEATURES:
• Measures temperature, pressure,
flow, current, voltage, and more.
• Low-Cost, Portable, USB or Ethernet
Data Logger. This product is similar
to the DI-710 Series but with Signal
Conditioned inputs.
• Eight DI-8B signal-conditioned
analog inputs. For a 16 channel version
see the DI-718Bx Series.
• Stand-alone data logger option
allows in-the-field measurements to
be saved to Secure Digital Cards (SD).
• 14-bit analog to digital conversion
• Includes WinDaq Software.
• Record from as low as 0.0017
Hz to as much as 14,400 Hz (assumes
SD latencies of 80 milliseconds or less)
with Stand-alone models or from 0.0034
Hz up to 4,800 Hz with PC-connected
instruments (WinDaq/HS required to achieve
recording rates over 1,108 Hz with PC-connected
instruments).
• Wide variety of measurement
functions and ranges based on DI-8B
module selections. Mix and match modules
as needed. |
|
 |
|
Product Highlights
The DI-718B is an eight-channel, DI-8B module data logger
system. Each DI-718B accepts up to eight high-performance,
plug-in (DI-8B) signal conditioning modules to include
virtually any isolated, industrial-type signal. Because
DI-8B modules are identical in pinout and size, they can
be mixed or matched in any combination. Choose from thermocouple,
true rms, voltage, strain, frequency, process current,
RTD, potentiometric, or DC transducer—whatever suits
your application. A eraseable sticker on the top of the
instrument allows easy identification of all installed
DI-8B modules.
DI-718B Series options include interface type and PC-connected
or stand-alone data logger operation. Interface options
are USB or Ethernet. Instruments with the stand-alone
data logger option feature a built-in multimedia socket
that accepts standard Secure Digital (SD) memories to
which acquired data may be stored without a connected
PC. SD memories are the same commonly available mass storage
devices used with digital cameras and MP3 players. Memories
ranging in size from 16MB to 1GB are supported. Instruments
without this option must remain tethered to a PC’s
USB or Ethernet port during data acquisition and use the
PC’s own program and memory to store acquired data.
Make Industrial Measurements Through DI-8B Plug-in
Signal Conditioning Modules
Each channel on the DI-718B accomodates one DI-8B module
providing a single channel of isolated input protection,
amplification, and filtering. DI-8B modules are plugged
into a socketed backplane and are secured with a mounting
screw. Each DI-718B channel has 4 corresponding screw
terminals for your signal connections: channel +, channel-,
excitation +, and excitation -. These terminals satisfy
all transducer inputs and provide sensor excitation if
necessary. Access to the DI-8B modules is through a removable
front panel.
Powerful Data Acquisition Server Capability
DI-718B Stand-alone data logger are the first in their
price range to offer data acquisition server capability.
Acting as a server allows stand-alone instruments to locally
and independently acquire data to their memory cards,
and then make that acquired data available upon demand,
either by plugging the memory card into a reader, or uploading
via the Ethernet interface.
Ethernet-enabled DI-718Bs provide the most power and flexibility.
A DI-718B with an Ethernet interface and built-in memory
transparently becomes like any other computer on a network,
able to share recorded data over a network to a PC on
the other side of the facility, or over the Internet to
a PC on the other side of the world. These stand-alone
instruments can be added easily and seamlessly to existing
networks without incremental bandwidth burdens, storing
data in memory and uploading on demand. Stand-alone data
logger can also be controlled locally using multifunction
push-button control and multi-colored, red, green, orange
LED status indicator.
Recommended Memory Card
For optimal performance, DATAQ Instruments, Inc. recommends
using a SanDisk Secure Digital Card to record your data.
Fast Throughput Rate
Supports sample throughput rates to 14400 samples per
second (assumes SD latencies of 80 milliseconds or less)
to SD with stand-alone Models and 4800 samples per second
to PC with PC-connected Models. WinDaq/HS is required
to achieve recording rates over 1,108 Hz with PC-connected
instruments.
Easy to Connect & Use
Installs in seconds. Simply connect to your computer's
USB port or an Ethernet port using the supplied cable.
Connect power, then connect your signals to the provided
screw terminal blocks. Stand-alone models just need a
memory card and power.
Includes WinDaq Software
Be up and running minutes out of the box with WinDaq acquisition
and playback software. WinDaq/Lite software is included
free with the purchase of every DI-718B instrument. WinDaq/Lite
operates at a maximum throughput recording rate of 1,108
Hz with a DI-718B Instrument. A special version of WinDaq
acquisition software may be purchased (WinDaq High Speed
Option) allowing you to record data at the speed of the
instrument (up to 4800 Hz).
WinDaq Waveform Browser, our unrestricted playback and
analysis software for Windows, is also included free with
the purchase of every DI-718B. Use it to review, measure,
compare, and analyze the waveform file after it has been
recorded by WinDaq acquisition software. WinDaq software
products support up to 14 bits of measurement resolution.
Looking for the same features without signal conditioned
inputs?
Our DI-710 Series Data Logger provides all the same great
features as the DI-718B Series - without the built-in
DI-8B backplane. View our complete line of Data Logger.
|
Models
& Prices
| Part
Number |
Description |
Price |
Buy
Online |
| DI-718B-U |
Low-cost, portable, USB data acquisition
system featuring 8 inputs for DI-8B
signal conditioning modules (not included),
a maximum throughput rate up to 4800
samples/second. Includes USB and Power
cables, bare stereo jack for remote
contol operations, software, and documentation. |
£595 |
|
| DI-718B-US |
Same as DI-718B-U but with stand-alone
data logger capability and maximum sample
rate up to 14400 samples per second
to SD. |
£695 |
|
DI-718B-E
|
Low-cost, portable, Ethernet data
acquisition system featuring 8 inputs
for DI-8B signal conditioning modules
(not included), a maximum throughput
rate up to 4800 samples/second. Includes
Power cable, bare stereo jack for remote
contol operations, software, and documentation
(Ethernet cable not included). |
£795 |
|
DI-718B-ES
|
Same as DI-718B-E but with stand-alone
data logger capability and maximum sample
rate up to 14400 samples per second
to SD. |
£895 |
|
WINDAQ/HS-
718B
|
Special High-Speed version of WINDAQ/Lite.
Record at the speed of the instrument
when acquiring directly to a PC. Not
required when acquiring to built-in
memory. CD will be shipped (shipping
charges apply). |
£595 |
|
WINDAQ/HS-
718B-EMAIL
|
Special High-Speed version of WINDAQ/Lite.
Unlock Code ONLY. No
CD will be shipped. This is for people
who have purchased the hardware product
and would like to upgrade to High Speed
|
£595 |
|
| 101014-1G |
1 GigaByte Secure Digital Flash Memory.
For use with stand-alone models only. |
£99 |
|
| 101014-128 |
128 MegaByte Secure Digital Flash
Memory. For use with stand-alone models
only. |
£19 |
|
| 101014-CR |
USB Secure Digital Memory Card Reader. |
£25 |
|
| 100952 |
Power Connector (for customers who
want to provide their own power). |
£2 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
